EG200 Twin Blade Edger
Professional twin blade lumber edger with gas/diesel/electric power, one fixed/ one adjustable 10” carbide-tipped blades, 24 ¾" max flitch width, 2" max board thickness, 15" max finished board width, 55-70 fpm powered roller feed system and an optional trailer package.
- 2 Circular Blades. 1 Adjustable Blade.
The value of lumber with clean edges can often exceed the value of rough-cut boards. In one pass, Wood-Mizer’s EG200 Twin Blade Board Edger takes boards fresh off the mill and turns them into clean, square edged lumber. This edger is easy to use, with one fixed blade and one moveable blade that adjusts with a manual dial. Easily select the precise size of lumber you need, from 3" to 15" wide. Lower the perimeter fence when you need to edge only one side of a board. Add a trailer package for easy transporting.
| Power Selections | |
|---|---|
| Power Selections | 15HP (11kW) electric24HP (17.9kW) Yanmar diesel26.5 HP (19.7kW) Kohler gas |
| Cutting Capacities | |
| Min Width of Cut | 3" (76 mm) |
| Max. Material Thickness | 50mm (2") |
| Blade | |
| Number of Blades | 2 |
| Shaft Size | 3" (76mm) |
| Blade Diameter | 14" (355.6 mm) |
| Blade Kerf | 8 Tooth 0.150" (3.8 mm) |
| Blade Adjustment Method | Manual Dial |
| Blade position | One Fixed One Operator Set |
| Min. Distance Between Blades | 3" (76mm) |
| Feed System & Operation | |
| Feed Speed | 55-70 ft/min |
| Board Kickback Prevention | Plate Anti-Kickback fingers |
| Board Alignment | N/A |
| Material Hold-down | Hold-down rollers |
| Feed Motor | Powered Rollers |
| MultiRip Function | N/A |
| Operator Controls | Control Panel |
| Feed System | Power rollers |
| Options | Trailer PackageReturn Roller Kit |
| Machine Dimensions & Requirements | |
| Length | 20' 4" (6.2m) |
| Height | 51" (1.3m) |
| Electrical Requirements | 380V-480V 3Ph 100A |