- Images
- Videos
Conquer logs with the fastest, fully-loaded super hydraulic portable sawmill featuring deluxe engine-powered hydraulic log handing and saw head, pedestal control station with joysticks, debarker, and more..
Conquer logs with the fastest, fully-loaded super hydraulic portable sawmill featuring deluxe engine-powered hydraulic log handing and saw head, pedestal control station with joysticks, debarker, and more..
Conquer logs with the LT70WIDE Super hydraulic portable sawmill! LT70WIDE Super hydraulic portable sawmill features a cutting capacity for sawing 36" diameter logs into 34" wide boards up to 20’2” in length. Built in the USA with a premium quality welded steel frame The patented open side of the LT70 hydraulic sawhead allows for minimal leveling during set-up, easy off-bearing with the trapezoid shaped bed, and sawing of odd shaped logs. Featuring debarker, enhanced HMI intuitive operator interface, hydraulic loading arms, hydraulic toeboards, hydraulic bi-directional chain log turner, deluxe board return arm and table, and optional laserlight, LT70WIDE Super hydraulic portable sawmill is fast and fully-loaded.
Built in the USA
From raw steel to fabrication, forming, welding, paint, assembly and final inspection, our dedicated employees at the Wood-Mizer owned and operated factory in the heart of the Midwest USA have been manufacturing premium quality Wood-Mizer equipment at a low cost to you since 1982.
Wide In-Class Sawing Capacity
Saw softwood and hardwood logs up to 36” in diameter with a 34” width of cut and 20' 2” length before extensions – more than enough capacity for most logs you'll come across and all the wide slabs you'll want to make.
Auto Board Return Arm and Table
Drag back boards for easier offbearing with the auto board return arm and attached outfeed table. The board return arm is powered by an easy-to-use switch on the control panel.
Hydraulic Log Loading Arms
Load large logs onto the sawmill bed with the hydraulically controlled loading arms. Each arm features a self-leveling, heavy-duty cylinder.
Hydraulic Vertical Side Supports
Four strong steel side supports – two manual and two vertical hydraulically controlled with heavy-duty rollers to assist with turning logs - are adjustable up/down to stabilize logs on the bed during loading, turning, clamping, and sawing. An additional built-in bed side support on each bunk allows for final cuts as low as 1” of the bed.
Joystick Controls
Two fully-proportional joysticks control all head and bed functions of the sawmill including side supports, log clamp, log turner, toeboards, blade guide arm, and debarker. The joysticks can also control additional accessories such as log decks and incline conveyors.
Hydraulic Bi-Directional Log Clamp
The heavy-duty bi-directional hydraulic log clamp tightly fastens logs for sawing and is adjustable up/down and in/out as material is cut.
Hydraulic Roller Toeboards
Two hydraulic roller toeboards assist with precise leveling of the heartwood of the log to maintain lumber quality. The toeboards are also equipped with rollers to easily move material across the bedframe.
Powerful Diesel Engine
The powerful and reliable 55HP diesel engine delivers the necessary power to meet your high production sawing needs.
Hydraulic Bi-Directional Chain Log Turner
Twice as fast as a claw turner, logs and cants are easily turned and rotated for maximum control with a hydraulically controlled bi-directional steel chain log turner.
Auto LubeMizer Blade Lubrication
Keep the sawmill blade cool and free of pitch, sap, and sawdust while sawing with the auto LubeMizer blade lubrication system. Featuring an adjustable electronic flow controller and pump, the LubeMizer applies a special lubricating solution to both sides of the blade for better blade life and sawing performance.
Debarker
Mud, rocks, bark, and other sawmill blade dulling debris is no longer a problem with the debarker. By clearing a ¼” wide path in front of where the sawmill blade enters the cut, the debarker protects sawmill blades from damage. With a debarker, you will save money by extending your sawmill blade life and you will also save time previously spent on prewashing logs and changing blades more often from sawing into debris.
| Power | |
|---|---|
| Power Selections | 41kW (55HP) diesel |
| Cutting Capacity | |
| Max Width of Cut | 34 1/2" (0.88m) |
| Max Log Diameter | 41" (1.05m) |
| Max Log Diameter | 36" (.91m) |
| Max Cant Width | 12 3/4" (.32m) |
| Production Rate | up to 1,050 bd ft/hr (2.47m³/hr) |
| Max Log Length | 20' 2" (6.2m) |
| Max Log Length (with extensions) | 44' 2" (13.5m) non remote only |
| Log Weight | 4,400lbs (1,996kg) |
| Blade | |
| Blade Length | 196.85" (5,000mm) - WIDE |
| Blade Guides Style | Roller Guides |
| Blade Lubrication System | LubeMizer® |
| Blade Tension System | Hydraulic Tension System |
| Blade Width | 1 1/4" (32mm) 1 1/2" (38mm) |
| Blade Guides Size | 1 1/4" (31.75mm) 1 1/2" (38.10mm) |
| Blade Wheels | |
| Blade Wheel Diameter | 24" (600mm) |
| Blade Wheel Type | Belted Blade Wheels |
| Head Features and Options | |
| Operator Location | Pedestal Remote Station |
| Head Forward/Reverse | Hydraulic (Fully Proportional) |
| Head Up/Down | Electric |
| Blade Engagement | Auto Clutch |
| Blade Guide Arm | Adjusted with Control Switch |
| Debarker | Standard |
| Board Removal | Deluxe Board Return Arm & Table |
| Bed Features and Options | |
| Side Supports | 2 Vertical Hydraulic & 2 Manual Side Supports |
| Log Leveling | Hydraulic Leveling Rollers |
| Log Turning | Hydraulic Bi-directional Chain Turner |
| Log Loading | Hydraulic Log Loading Arms |
| Trailer Package | Standard |
| Log Clamping | 1 Hydraulic Log Clamp |
| Additional Bed Options | Resaw Attachment Shingle & Lapsider Attachment Inclined Conveyor Transfer Deck 6' (1.83m) Bed Extensions |
| Machine Dimensions and Requirements | |
| Bed Construction | Monorail |
| Frame Construction | Cantilever |
| Mobility | Stationary |
| Trailer Hitch Size | 2" (50mm) |
| Delivery Methods | Pick-Up Delivery |
| Weight (heaviest power option) | 4,800lbs (2,277kg) |
| Length | 26' 2" (8m) |
Parts & Accessories
-
Shingle & Lapsider$2,243.00 -
Drive Belt Tension Gauge$47.25 -
B72.5 Blade Wheel Belt$55.20 -
Lathe-Mizer Attachment$4,793.00 -
6' Bed Extension$3,512.00
