With the MP200 Planer/Moulder, you can plane and mould on one or two sides at once to produce mouldings or flooring. The MP200 includes 1 horizontal top cutter, and 1 vertical side cutter. Both can be fitted with planing knives or moulding profile knives.
You begin by planing or moulding one or two adjoining sides in one pass. The power feed rollers move the board under the horizontal cutter and past the vertical side cutter. If you are just planing, then you can simply flip the board over, adjust the table height, and then plane the final two sides.
If you are moulding a profile, then you simply need to change out the knives, adjust the table height and then mould the final two sides.
With the MP200, you can plane and mould timber in only two passes.
| 2-sided processing | |
|---|---|
| Planing Width | 10-300 mm |
| Planing Height | 10-100 mm |
| Top Horizontal Cutterhead | |
| Diameter | 72 mm |
| Largeur | 410 mm |
| Motorisation | 3 kW (ECO) |
| Side Cutterheads | |
| Spindle Diameter | 30 mm |
| Max. Height | 100 mm |
| Max. Diameter | 140 mm |
| Motorisation | 3 kW |
| Système d'avance | |
| Motorisation | 0.37 kW (PRO) |
| Vitesse de l'avance | 2-11 m/min (PRO) |
| Dust Collection Specifications | |
| Dust Extraction Ports | 4 po (100 mm)5 po (125 mm) |
| Recommended Airflow | 2000 m3/h |
