SlabMizer MB200 Slab Flattener

23 793,00 $
Disponible
Formulaire de Devis
Imprimer cette page Ajouter au comparateur
Wood Slab Flattening Machine for Wide Slabs, Burls, and Boards

Slab flattening mill with 56" wide (72" option coming soon) x 8" thick x 13' long capacity, powered cutter head directional controls with variable feed speed, 5" cutter head with five carbide knives, and orbital sanding head attachment.

Avantages
  • Fabriqué aux USA
  • 2 ans de garantie
La Description SlabMizer MB200 Slab Flattener

The SlabMizer MB200 Slab Flattener efficiently surfaces and flattens wood slabs, boards, burls, cookies, and other wide material with minimal labor. Compared to a traditional router or planer, the SlabMizer flattens wider and thicker material up to 56” wide and 8” thick in less time using powered cutter head directional controls with variable feed speed. For larger capacity, 5’ table extensions can be added to extend the material length and a 72” width option is coming soon.


Operation

Material is secured on the heavy duty, welded steel frame by 4 adjustable clamps. To adjust the cutting depth, a hand crank located on the top of the cutter head is adjusted from 1/64” to 1/8” in 1/64” increments. The cutter head is engaged and operated by a powered control console that can be used from any side of the machine or detached from the stand for handheld use. Powered controls include on/off, variable feed speed, and a joystick direction control for the X, Y, and Z axis for finishing material with or against the grain. The cutter head can also be operated manually with a handle. Once both sides of the slab are surfaced, fine finishing is accomplished by using the 7” orbital sanding head attachment for the desired finish. Dust from the operation is easily removed with a 3-1/2" diameter extraction port on top of the cutter head that can be connected to a dust extraction system.r

Read More
Plus d’information SlabMizer MB200 Slab Flattener
Plus d’information
Power Selections
Sélections de puissance 3HP Electric 1-Phase 220V, 30A
Material Capacities
Épaisseur du produit maximum 200mm (8")
Longueur minimum du produit 56 cm (22")
Longueur maximum du produit 13' or Longer with Optional 5' Extensions
Prof. de coupe min 1/64 po
Profondeur maximale de coupe 1/8"
Machine Dimensions & Requirements
Tête de coupe 5" with Five 4-Sided Carbide Knives (15mm x 15mm x 2.5mm - R150)
tête de ponceuse 7" Orbital with Hook/Loop Paper
Vitesse 5,500 RPM
Moteur d'avance Motor, 1/6HP 90RPM 230V 3PH 19:1 Gear
Diamètre du port de collecte de sciure 90mm (3-1/2")
Options Optional 5' Modular Table Extensions
Obtenir une estimation SlabMizer MB200 Slab Flattener
Privacy Policy